Raptor Force Slip-On System KTM 790 Adventure / R / 890 Adventure / R / L / Husqvarna Norden 901 / CFMoto 800MT / Touring

-aluminum sleeve
-material: 7075 T6
-length: 450 -200mm
-thickness: 2mm
-surface: matt brushed

Matt Black

Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal Cycling.

aluminium sleeve, High Polished, length 450-200mm, 2mm

Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix.
The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix.

Carbon is only heat-resistant to a limited usage. *

Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases.
We have christened this proprietary development RI Carbon: Reinforced Carbon.
However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing.

For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light.

 Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material. Carbon might have different colour shades and nuances.

* * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness.

* Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options.
Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.

 

Titan Ceramics Titan Ceramics is satin titanium Soft Touch Cermaics Coating.
Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates.
Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F).
This makes the coating ideal exhaust systems and components.
Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.
These coatings provide superior protection again corrosive environments and thermal shock.

Aluminum sheath coated with Black velvet Matt Ceramics. Matt Black Velvet, length 450-200mm, 2mm aluminum shell Our Ceramic coatings are temperature stable from 650°C, up to 1,100°C for the Black Velvet series. We process two high quality Ceramic formulations. The Ultra Performance Metallic Series. Temperature stable to over 650°C, Black Velvet offers very good corrosion protection, as well as optimum flexibility on all base materials. The Ultra Performance Satin Metallics are not comparable to conventional silicone products. Temperature stable up to over 1,100°C, our Ceramic Coatings are characterized by an optimal flex in combination with a hard and abrasion resistant surface. No calcification at constantly high operating temperatures, no cracking or detachment even at extreme temperature fluctuations. Properties Temperature stable up to over 1,100°C Excellent corrosion protection Optimum combination of flex and hardness Chemical resistant Very good thermal insulation / reduction of radiation temperature

 

Einlasskappe V2A High-Polished

Einlasskappe V2A High-Polished

Einlasskappe in Black Velvet Matt Ceramics: Black Velvet ist eine hochwertige matt black Ceramik Beschichtung. Black Velvet setzt durch die spezielle SoftTouch Oberfläche neue Akzente in Sachen Design. Laserlogo nicht möglich mit Kombination black-schwarz. Die Ultra Performance Satin Metallics sind nicht vergleichbar mit herkömmlichen Silikon Produkten. Temperaturstabil bis über 1.100°C zeichnen sich unsere Ceramic Coatings durch einen optimalen Flex in Verbindung mit einen harten und abriebfesten Oberfläche aus. Kein Auskalken bei konstant hohen Betriebstemperaturen, keine Rissbildung oder Ablösung auch bei extremen Temperaturschwankungen.

Stainless Steel factory

Stainless steel clamp titanium finish

Stainless steel in matt black

Stainless steel clamp in Black Velvet matt. Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection

V2A Stainless steel sanded, Stainless steel discolors golden-brown under the influence of heat in contrast to aluminum.

Titanium Works Finish. A unique offering from Speed Products of Europe. Titanium Works Finish is not a coating, but a media blast finish using our own special recipe of ingredients. The result is a stainless steel exhaust that after it goes through a heat cycle on the motorcycle, takes on unique coloring that looks much like those works components our factory racers use.

Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.

Black Velvet
Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
repeated thermal cycling. These coatings provide superior protection again corrosive environments and
thermal shock.

 

*Laserlogo geht nicht auf Carbon^ * Bei dünnem Material wie 1mm oder düneres Edelstahblech- und Rohr und/oder Titanrohr kann es zu leichten Einwölbungen beim Lasern Das beieinträchtig nicht die Stabilität des Materials.