COLOR/FINISH Chrome
END CAP STYLE Slash-Cut
MATERIAL Steel
MODEL Slash Cut
TYPE Full System
UNITS Each
PRODUCT NAME Exhaust System
DESIGN/CONFIGURATION 2-Into-2 System
MUFFLER STYLE Round
BASE FINISH Chrome
SP Cobra Slash Cut Exhaust System
? Large 2.5", 222° heat shields fit from the exhaust ports to the chrome billet tips for a seamless look and non-bluing finish
? Gives overall power increase with improved rideability
? Easy installation with all mounting hardware include
Marke Modell Hubraum Jahr Land Engine Info Position
SUZUKI C 50 Boulevard 800 2005 AMERICA
SUZUKI C 50 Boulevard 800 2006 AMERICA
SUZUKI C 50 Boulevard 800 2007 AMERICA
SUZUKI C 50 Boulevard 800 2008 AMERICA
SUZUKI C 50 Boulevard 800 2009 AMERICA
SUZUKI C 50 Boulevard 800 2010 AMERICA
SUZUKI C 50 Boulevard 800 2011 AMERICA
SUZUKI C 50 Boulevard 800 2012 AMERICA
SUZUKI C 50 Boulevard 800 2013 AMERICA
SUZUKI C 50 Boulevard B.O.S.S. 800 2014 AMERICA
SUZUKI C 50 Boulevard 800 2015 AMERICA
SUZUKI C 50 C Boulevard Limited 800 2007 AMERICA
SUZUKI C 50 C Boulevard Limited 800 2008 AMERICA
SUZUKI C 50 C Boulevard Limited 800 2009 AMERICA
SUZUKI C 50 Boulevard Special Edition 800 2013 AMERICA
SUZUKI M 50 Boulevard 800 2005 AMERICA
SUZUKI M 50 Boulevard 800 2006 AMERICA
SUZUKI M 50 Boulevard 800 2007 AMERICA
SUZUKI M 50 Boulevard 800 2008 AMERICA
SUZUKI M 50 Boulevard Limited 800 2007 AMERICA
SUZUKI M 50 Boulevard Limited 800 2008 AMERICA
SUZUKI C 50 T Boulevard 800 2005 AMERICA
SUZUKI C 50 T Boulevard 800 2006 AMERICA
SUZUKI C 50 T Boulevard 800 2007 AMERICA
SUZUKI C 50 T Boulevard 800 2009 AMERICA
SUZUKI C 50 T Boulevard 800 2010 AMERICA
SUZUKI C 50 T Boulevard 800 2011 AMERICA
SUZUKI C 50 T Boulevard 800 2012 AMERICA
SUZUKI C 50 T Boulevard 800 2013 AMERICA
SUZUKI C 50 T Boulevard 800 2014 AMERICA
SUZUKI C 50 T Boulevard 800 2015 AMERICA
SUZUKI C 50 T Boulevard Classic 800 2012 AMERICA
SUZUKI VL 800 Intruder C 800 805 2005 EUROPE 39 KW(53 PS)
SUZUKI VL 800 Intruder C 800 805 2006 EUROPE 39 KW(53 PS)
SUZUKI VL 800 Intruder C 800 805 2007 EUROPE 39 KW(53 PS)
SUZUKI VL 800 C Intruder C 800 C 805 2009 EUROPE 39 KW(53 PS)
SUZUKI VL 800 C Intruder C 800 C 805 2010 EUROPE 39 KW(53 PS)
SUZUKI VL 800 C Intruder C 800 C 805 2011 EUROPE 39 KW(53 PS)
SUZUKI VL 800 C Intruder C 800 C 805 2012 EUROPE 39 KW(53 PS)
SUZUKI VL 800 C Intruder C 800 C 805 2013 EUROPE 39 KW(53 PS)
SUZUKI VL 800 C Intruder C 800 C 805 2014 EUROPE 39 KW(53 PS)
SUZUKI VL 800 C Intruder C 800 C 805 2015 EUROPE 39 KW(53 PS)
SUZUKI VL 800 Volusia 805 2001 AMERICA
SUZUKI VL 800 LC Volusia 805 2001 EUROPE 39 KW(53 PS)
SUZUKI VL 800 Volusia 805 2002 AMERICA
SUZUKI VL 800 LC Volusia 805 2002 EUROPE 38 KW(52 PS)
SUZUKI VL 800 Volusia 805 2003 AMERICA
SUZUKI VL 800 LC Volusia 805 2003 EUROPE 38 KW(52 PS)
SUZUKI VL 800 Volusia 805 2004 AMERICA
SUZUKI VL 800 LC Volusia 805 2004 EUROPE 38 KW(52 PS)
SUZUKI VZ 800 Intruder M 800 805 2005 EUROPE 25 KW(34 PS); 39 KW(53 PS)
SUZUKI VZ 800 Intruder M 800 805 2006 EUROPE 25 KW(34 PS); 39 KW(53 PS)
SUZUKI VZ 800 Intruder M 800 805 2007 EUROPE 25 KW(34 PS); 39 KW(53 PS)
SUZUKI VZ 800 Intruder M 800 805 2008 EUROPE 25 KW(34 PS); 39 KW(53 PS)
SUZUKI C 50 Z Boulevard Special Edition 800 2005 AMERICA
SUZUKI VL 800 Z Volusia 805 2003 EUROPE 38 KW(52 PS)
SUZUKI VL 800 Z Volusia 805 2004 EUROPE 38 KW(52 PS)
Suzuki VL 800 Volusia 01-04
Suzuki VL 800 C Intruder /C50 Boulevard 05-09
Suzuki VZ800M Intruder /M50 Boulevard 05-08
Anmerkung:* ABE/Homologation gilt nur für folgende Fahrzeugtyp : Ansonsten gilt Anmerkung*e1-a1
VL 800 Intruder Volusia 2001-2004 BM (-K4)
VL 800 Intruder Volusia 2001-2016 BM *
VZ 800 Marauder -1998 AF (ab 1997-VZ 800V, ab 98 VZ 800W )
VZ 800 Marauder 1999-2004 AF ( 1999-2004 VZ800(X,Y/K1/K2/K3 (99, '00,01-02-03 * (04 -K4))
IMPORTANT: For Volusia 800 models it is recommended that you re-jet your bike with a Cobra Jet Kit, part # 92-3267. For C50 & M50 models It is recommended that you install a Cobra Fi2000® Digital Fuel Processor with your Cobra exhaust system (part# 92-0826). Cobra is not responsible for the performance of any other fuel management system used with Cobra exhaust systems. Before starting engine remove all fingerprints from chrome with a wax or chrome polish. Failure to do so can cause discoloration. Due to fluctuations in carburetor settings, timing, etc., Cobra Engineering does not warrant against chrome discoloration.
Average product review
Safety instructions for handling exhaust systems
- Heat warning: Exhaust systems become extremely hot during operation. Avoid contact with the system immediately after operation as there is a risk of burns. Wait until the system has cooled down completely before carrying out any work on it.
- Risk of injury: When dismantling, installing or repairing exhaust systems, there is a risk of injury from falling components or the use of tools. Use suitable protective gloves and safety goggles.
- Avoid inhaling exhaust fumes: Exhaust gases contain harmful substances such as carbon monoxide. Only work in well-ventilated areas or use extraction systems to prevent the accumulation of exhaust fumes.
- Take care when lifting: If the vehicle needs to be lifted, use suitable lifting equipment and secure the vehicle with jack stands to prevent it from falling.
- Fire hazard: Ensure that there are no flammable materials (such as oil or fuel) near the exhaust system, as these can be ignited by the heat.
- Use suitable tools: Only use suitable and intact tools to prevent damage to the exhaust system and injuries.
- Schutzausrüstung tragen: Wear suitable personal protective equipment (PPE) for all work, such as work gloves, safety goggles and, if necessary, hearing protection, to prevent injuries.
Manufacturer: Speed Products Gmbh, Zum Kaiserbusch20, 48165 Münster, www.speedpro.de
Manufactured according to customer specifications
Our exhaust systems are manufactured according to customer wishes and specifications. They are not stock items (stock items are marked accordingly and cannot be adapted, changed or configured), but are manufactured individually according to customer wishes within the production possibilities.
The following applies: according to Section 312d Paragraph 1 No. 1 of the German Civil Code, there is no right of withdrawal for distance selling contracts for the delivery of goods that are manufactured according to customer specifications. Please also read further information on the right of withdrawal and the general terms and conditions. However, since exhaust systems are handmade, delivery delays can occur for certain systems. However, silencers, manifolds and exhaust systems are not mass-produced goods, but are lovingly hand-welded, polished, manufactured and refined by experts according to your wishes and specifications. We endeavour to keep delivery times as short as possible.
All important information can be found on the left under the additional customer information.
