Barracuda RS-R 450 Cone rund Slipon Kawasaki Ninja 400

Artikelnummer: 907-4500-348

 

Artikelbeschrijving

BARRACUDA RSR Uitlaat

  • De BARRACUDA RSR serie verfrist niet alleen het uiterlijk van de fiets, maar biedt ook een scherper geluid
  • Een optimale prijs / prestatie verhouding in combinatie met een aantrekkelijke prestatiewinst te onderscheiden dit systeem uit ook
  • DB-Killer: Uitneembare
  • De fijnste optiek door uitmuntend ontwerp
  • Perfecte synthese tussen esthetiek en innovatieve toegepaste technologie
  • Perfecte montage, innovatief ontwerp, prestaties zonder compromissen
  • Levering komt aanbouwklaar voor de montage
  • ECE-typegoedkeuring voor gebruik op de openbare weg
  • Uitlaatpijp Materiaal: aluminium
  • Levering: Slip on (SLO) met ABE-EG* De Slipon uitlaatpijpen zijn inclusief de demper met middelpijp, bevestigingsmateriaal en de uitneembare DB Killer

Categorie: Ninja 400/Z400/Ninja 250/ 2018-


vanaf 279,95 €

incl. Omzetbelasting , Plus Verzending (Paket)

Direct beschikbaar
Door het grote aantal bestellingen en de effecten van de pandemie kunnen de levertijden langer zijn.
*We're sorry, due to COVID-19 delivery times are running longer than usual. We are actively working to improve these issues.
Finanzieren ab 21 EUR / Monat
Mehr Informationen zum Ratenkauf


Lengte ommanteling
Materiaal ommanteling

De Exhaust is verder verkrijgbaar met verschillende soorten materiaal voor de ommanteling oftewel buitenlaag. HiTec AL 7065 in matt brushed, mattblack, CarbonRi, Titan.

Materiaal ommanteling
  • -aluminum sleeve
    -materiaal: 7075 T6
    -lengte: 450 -200mm
    -dikte: 2mm
    -oppervlakte: opaco spazzolato
  • mat black/zwart
    materiaal aluminium, 
    lengte 450-200mm, 2mm
    Dit item kan niet worden besteld, maar alleen als een upgrade optie (meerprijs).
  • aluminium sleeve/materiaal ommanteling, High Polished/gepolijste, lengte 450-200mm, 2mm
  • -Carbon sleeve
    -materiaal: Carbon
    -lengte: 450-200mm
    -dikte: 1.5mm
    -oppervlakte: gloss
  • Titan Ceramics ist eine hochwertige Titan Design Ceramik Beschichtung im Titan Design. 
    Titan Ceramics setzt durch die spezielle SoftTouch Oberfläche neue Akzente in Sachen Design.Die Ultra Performance Satin Metallics sind nicht vergleichbar mit herkömmlichen Silikon Produkten.Temperaturstabil bis über 1.100°C zeichnen sich unsere Ceramic Coatings durch einen optimalen Flex in Verbindung mit einen harten und abriebfesten Oberfläche aus.Kein Auskalken bei konstant hohen Betriebstemperaturen, keine Rissbildung oder Ablösung auch bei extremen Temperaturschwankungen.


     

  • -aluminum sleeve
    -materiaal: 7075 T6
    -lengte: 450-200mm
    -dikte: 2mm
    -oppervlakte: Black Velvet
Outletcap
Inlaatklep RVS

Dual silencer need inlet cap item 2x

  • Einlasskappe V2A High-Polished
  • Einlasskappe V2A High-Polished
  • Einlasskappe in Black Velvet Matt Ceramics: Black Velvet ist eine hochwertige matt black Ceramik Beschichtung. Black Velvet setzt durch die spezielle SoftTouch Oberfläche neue Akzente in Sachen Design. Laserlogo nicht möglich mit Kombination black-schwarz. Die Ultra Performance Satin Metallics sind nicht vergleichbar mit herkömmlichen Silikon Produkten. Temperaturstabil bis über 1.100°C zeichnen sich unsere Ceramic Coatings durch einen optimalen Flex in Verbindung mit einen harten und abriebfesten Oberfläche aus. Kein Auskalken bei konstant hohen Betriebstemperaturen, keine Rissbildung oder Ablösung auch bei extremen Temperaturschwankungen.
Reinforced Band
Reinforced Band
Clamp
Clamp
  • Titanium Finish nennen wir eine bestimmte Veredelung von leichtem Edelstahlrohr um einen Titan Design Effekt zu erzielen. Edelstahl verfärbt sich golden-braun unter Hitzeeinfluss.
  • Eine hochwertige mattschwarze Beschichtung und sehr hochwertig verarbeitet. Diese Beschichtung ist nicht vergleichbar mit herkömmlichen eloxiertem schwarz.
  • Unsere Ceramic-Beschichtungen sind Temperaturstabil von 650°C, bis hin zu 1.100°C bei der Black Velvet Serie. Wir verarbeiten zwei hochwertige Ceramic Formulierungen. Die Ultra Performance Metallic Serie. Die Hochtemperatur Serie steht für eine hochglanzpolierte, chromähnliche Oberfläche. Temperaturstabil bis über 650°C bietet Black Velvet einen sehr guten Korrosionsschutz, sowie eine optimale Flexibilität auf allen Grundmaterialien. Die Ultra Performance Satin Metallics sind nicht vergleichbar mit herkömmlichen Silikon Produkten. Temperaturstabil bis über 1.100°C zeichnen sich unsere Ceramic Coatings durch einen optimalen Flex in Verbindung mit einer harten und abriebfesten Oberfläche aus. Kein Auskalken bei konstant hohen Betriebstemperaturen, keine Rissbildung oder Ablösung auch bei extremen Temperaturschwankungen. Eigenschaften Temperaturstabil bis über 1.100°C Excellenter Korrosionsschutz Optimale Kombination aus Flex und Härte Chemikalienbeständig Sehr gute thermische Isolierung / Verringerung der Abstrahltemperatur
midpipes
  • Please tell us your bikes year and type.
  • titanium finish mat
    materiaal RVS, 
    />Dit item kan niet worden besteld, maar alleen als een upgrade optie (meerprijs).
  • mat black/zwart
    materiaal RVS, 
    Dit item kan niet worden besteld, maar alleen als een upgrade optie (meerprijs).
  • Black Velvet
    materiaal RVS, 

    Dit item kan niet worden besteld, maar alleen als een upgrade option (meerprijs).
Logo

Decide to use between different choices of logos. Use Aluminum decal standard or Performance logo, 3D aluminum nameplate logo ( heat resistant, Standard Design) or Laser Logo ( not possible on Carbon or AL)

Logo
  • Barracuda Laserlogo exclusiv, edel, einzigartig!

    Wirkt sehr hochwertig auf mattschwarz, mattgebürstet und titanium finish.


    Anmerkungen:
    *Laserlogo geht nicht auf Carbon
    * Ist auf polierten Aluminium Hüllen nicht sehr stark ausgeprägt.

    * Bei dünnem Material wie 1mm oder düneres Edelstahblech- und Rohr und/oder Titanrohr kann es zu leichten Einwölbungen beim Lasern
    Das beieinträchtig nicht die Stabilität des Materials.



     

Your Configuration

 

Artikelbeschrijving

BARRACUDA RSR Uitlaat

  • De BARRACUDA RSR serie verfrist niet alleen het uiterlijk van de fiets, maar biedt ook een scherper geluid
  • Een optimale prijs / prestatie verhouding in combinatie met een aantrekkelijke prestatiewinst te onderscheiden dit systeem uit ook
  • DB-Killer: Uitneembare
  • De fijnste optiek door uitmuntend ontwerp
  • Perfecte synthese tussen esthetiek en innovatieve toegepaste technologie
  • Perfecte montage, innovatief ontwerp, prestaties zonder compromissen
  • Levering komt aanbouwklaar voor de montage
  • ECE-typegoedkeuring voor gebruik op de openbare weg
  • Uitlaatpijp Materiaal: aluminium
  • Levering: Slip on (SLO) met ABE-EG* De Slipon uitlaatpijpen zijn inclusief de demper met middelpijp, bevestigingsmateriaal en de uitneembare DB Killer


 
Short discription Exhaust muffler style: Barracuda RS-R Cone rund
 
DB killer:

Superquiet insert, removeable

Weight:

starts from 2.05 kg supershort to 2.5 kg standard lenght

Sound: full and throaty Barracuda sound
Spring system

Quick-Release System including tool

Power/Performance:

excellent. see Dyno Charts.

Art:

Slipon: Only muffler and midpipe will be changed

ABE:

E-mark* .

Muffler style: Upgrades
Form:

round

Sleeve lenght:

Standard: 450mm or 400mm Short or 350mm Supershort

Sleeve material: Standard: aluminium Superlite T6056 mattbrushed, or polished, Black, Mattblack, Mattwhite, CarbonRI , Titanium Ultralite
Outlep cap/Tip:

Standard: stainless steel polished or Mattbrushed, Mattblack, Mattwhite

Intake cap: Standard: stainless steel  polished or Mattbrushed, Mattblack, Mattwhite
Rivet straps: Standard: Rivet clamps/straps stainless steel polished or Mattbrushed, Mattblack, Mattwhite
Clamps:

Standard: stainless steel  polished or Mattbrushed, Mattblack, Mattwhite

Midpipe:
Slipon:

Standard: stainless steel Factory, or Mattbrushed,polished, Mattblack, Mattwhite

 
Notes:

E-Mark*. Nation Law might be different .

Options:

 See Notes/Options/configurations. See customer information. Upgrades are available against extra charge.


 


The Barracuda Slip-on system is a parallel line to the Bolt-on series and is based on a simple replacement of the stock muffler together with the link pipe. The rest of the stock system remains untouched. The system is developed and fine-tuned for each specific model of motorcycle, and is the last step before a serious tune-up involving the replacement of the entire exhaust system.

"The slip-on end pipes include the silencer with mid-pipe, mounting material and removable DB Killer*31. The round-shaped stainless-steel/aluminium silencer can be upgraded with different short lengths and sleeve materials, as well as containing a catalytic converter, for an extra charge. Other configurations are also available! Features: low weight, removable DB Killer*31, ultra-light hangers, corrosion-resistant construction, cylindrical, conical or round mid-pipes made of V2Aplus stainless-steel, high gloss polish finish, and securing by springs. Variations in length and torsion are also available (acc. to type) to obtain optimal ground clearance and low weight in accordance with the series specifications.
3 year warranty. And of course, the rich, deep sound and improved performance are all-inclusive! *** Please also check the declaration of weight of the particular silencer."

The Slip-on system is designed for the individual who wants improved performance without the expense and labor involved of a full system. This system produces a much richer and deeper sound than the quiet restrictive stock exhaust. The Slip-on system will give your bike a completely new look. The muffler is available in aluminum, titanium or carbon-fiber outer sleeve and will accentuate the beauty of the lines of your bike. The logo on the muffler will be a constant affirmation of your discerning taste.

Barracuda Slip-on System with DB  Killer
A beautiful result with a simple procedure using tensioning springs.
Simple mounting, including set up and spring-loading between the Barracuda exhaust system components (muffler and link pipe) and the remaining parts of the stock exhaust system.
Removal of restrictions on the motor, leading to considerable increases in available power and torque.
Precision workmanship using high-tech materials.
Choice of carbon-fiber , aluminum or titanium outer sleeve.
Characteristic deep penetrating Barracuda sound.
Aesthetic enhancement of the entire motorcycle.
Excellent compromise between price, quality and performance.
Reports on testing of Slip-on systems.


fabrikant: KAWASAKI
Motorcycle-model: Ninja 400 Ninja 500 Z 500
Notities & Uitzonderingen: *a1/*e1 Auspuffanlagen Schweiz
bouwjaar: 2023 2022 2021 2020 2019 2018 2024
uitlaatsystemen serie: Slip-on
Notities: *12

Gemiddelde artikelbeoordeling

#global.firstReview#: