KTM 1290 Superduke - in Vorbereitung! Coming
Barracuda RS-R 450 Cone oval Series 4-1 compleet systeem Road Legal/EEC/ABE homologated

Artikelnummer: 917-XXXX-048

Barracuda systemen zijn inclusief de demper met middelpijp ,bevestigingsmateriaal , uitneembaar DB-Killer en een speciale spruitstuk (alleen maar bij complete systemen).Deze zijn precies op de eigenschappen van de motor afgestemd. De oval edelstaal-aluminium demper kan tegen prijstoeslag zowel naar Black, CarbonRi of Titanium omhulsel, in verschillende Shorty lengten van 450-400-350-300m, als ook naar Kat worden geüpgraded. Kenmerken: laag gewicht, uitneembaar DB-Killer31, aanzielijk lichte beugels, roestwerende constructie, cilindrische, conische middelpijpen van V2Aplus edelstaal, hoogglans gepolijst, trilling beveiligd , afhankelijk van het type verschillend de lengte en buigen, voor optimale bodemvrijheid en laag gewicht onder haalbare serie-specificaties te bereiken, met 3 jaar garantie. Notities: *30 Uitzonderingen:

Categorie: Barracuda RSR Series


vanaf 565,33 €

incl. Omzetbelasting , Plus Verzending

Op dit moment niet beschikbaar


Outletcap
Lengte ommanteling
Materiaal ommanteling

De Exhaust is verder verkrijgbaar met verschillende soorten materiaal voor de ommanteling oftewel buitenlaag. HiTec AL 7065 in matt brushed, mattblack, CarbonRi, Titan.

Materiaal ommanteling
  • Das Aluminium wird matt gebürstet. Ein sehr edler Effekt. Kratzer fallen weniger auf.
  • Aluminium black/zwart geanodiseerd, 
    lengte 450-200mm, 2mm
    Dit item kan niet worden besteld, maar alleen als een upgrade optie (meerprijs).
  • mat black/zwart
    materiaal aluminium, 
    lengte 450-200mm, 2mm
    Dit item kan niet worden besteld, maar alleen als een upgrade optie (meerprijs).
  • aluminium sleeve/materiaal ommanteling, High Polished/gepolijste, lengte 450-200mm, 2mm
  • REinforced Carbon. Superleicht. Kohlenstofffaserverstärkter Kunststoff, auch CFK (Carbon-faserverstärkter Kunststoff; englisch carbon-fiber-reinforced plastic, CFRP) oder umgangssprachlich nur Carbon (engl. für Kohlenstoff) genannt, bezeichnet einen Faser-Kunststoff-Verbundwerkstoff, bei dem Kohlenstofffasern, meist in mehreren Lagen, als Verstärkung in eine Kunststoff-Matrix eingebettet werden. Unser Reinforced Material enthält eine weitere Schicht Metallgitterschicht zur Verstärkung.
  • Black Velvet is a high-quality semi-matt black ceramic coating. Black Velvet is setting new trends in design and aesthetics with a specific SoftTouch surface area. The Ultra Performance Satin Metallics are not comparable to conventional silicon products. Our ceramic coatings, heatresisting up to approx. 1100 °C, offer an optimal flex together with a hard and abrasion-resistant surface. There is no scaling at constant high operating temperatures and there is no crack formation or detach under extreme temperature fluctuation. Laser logo is not available with combination black-black.
  • Superlight weight, high temperature exhaust material. It has a low density and is a strong, lustrous, corrosion-resistant (including sea water, aqua regia and chlorine) transition metal with a silver color.
Inlaatklep RVS

Dual silencer need inlet cap item 2x

Inlaatklep RVS
  • Black Velvet is a high-quality semi-matt black ceramic coating. Black Velvet is setting new trends in design and aesthetics with a specific SoftTouch surface area. The Ultra Performance Satin Metallics are not comparable to conventional silicon products. Our ceramic coatings, heatresisting up to approx. 1100 °C, offer an optimal flex together with a hard and abrasion-resistant surface. There is no scaling at constant high operating temperatures and there is no crack formation or detach under extreme temperature fluctuation.
Reinforced Band
Reinforced Band
Clamp
Clamp
midpipes
midpipes
  • Linkpipe Factory stainless steel factory look.
  • Linkpipe stainless steel matt brushed.
  • Titanium Finish: Titanium Finish nennen wir eine bestimmte Veredelung von leichtem Edelstahlrohr um einen Titan Design Effekt zu erzielen. Edelstahl verfärbt sich golden-braun unter Hitzeeinfluss.
  • Stainless steel linkpipe matt black. Ultra Performance Coating based on silicon in matt black.
  • Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection
Collector
Collector
  • Made out of stainless steel factory look.
  • Lieferzeit 10 -12 Tage
  • Lieferzeit 10 - 12 Tage
  • Lieferzeit 10-14 Tage
  • Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection
Logo

Decide to use between different choices of logos. Use Aluminum decal standard or Performance logo, 3D aluminum nameplate logo ( heat resistant, Standard Design) or Laser Logo ( not possible on Carbon or AL)

Logo
  • Barracuda 3-D Exhaust Nameplate . Hitzefestes 3-D Aluminium Logo/Nameplate mit Hitzedichtung und 2 Nieten. Wunderschönes Aluminium , geschliffenes, erhaben 3D Barracuda Nameplate.
  • Laserlogo Barracuda -exclusiv, edel, einzigartig! Wird an die gewünschte Spezifikation und Auspuffserie angepaßt! Nicht als eigenständiges Produkt beziehbar, sondern nur als upgrade zu einem Dämpfer oder einer Anlage!
    Anmerkungen: Ist nicht lieferbar für Carbon. Auf der polierten Aluminium Hülle nicht sehr stark ausgeprägt. Gut sichtbar auf allen anderen Materialien , wie Alu Matt.Titan, Black, Brushed, Factory Look.
    Anmerkung: Auf  Aluminium Hüllen ist das weisse Laserlogo nur dezent, nicht akzentuiert sichtbar.
    Je nach Material wird das Logo als Voll oder Outline Logo gelasert.
Your Configuration

Gemiddelde artikelbeoordeling

#global.firstReview#:

Contactgegevens