Barracuda MAX RX Fullsystem 2in1 Kawasaki ER6N-F //Ninja 650///Versys 650 / KLE 650 -2016

Item number: 927-4373-548

"Complete system 2in1 * Complete mounting kit including all mounting parts, hangers, removable DB Killer*31. Optional round/oval Aluminium - CarbonRi - Titanium plus upgrades in short lengths. Notes: *34*25*45*e1 Exception: Fullsystem 2in1 supershort underbody/engine.We recommend 300mm length. Requires Cat Euro3.

Category: ER 6N-F / Ninja 650 2012 - 2016


starting from 519,95 €

including VAT. , plus shipping (Paket)

Available!
Due to the high volume of orders and the effects of the pandemic, delivery times may be longer.
*We're sorry, due to COVID-19 delivery times are running longer than usual. We are actively working to improve these issues.
Finanzieren ab 20.5 EUR / Monat
Mehr Informationen zum Ratenkauf


Sleeve length
Sleeve material

The muffler sleeve is available in different materials and finish, respectively.

Sleeve material
  • -aluminum sleeve
    -material: 7075 T6
    -length: 450 -200mm
    -thickness: 2mm
    -surface: matt brushed
  • Matt Black

    Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal Cycling.

  • aluminium sleeve, High Polished, length 450-200mm, 2mm
  • Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix.
    The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix.

    Carbon is only heat-resistant to a limited usage. *

    Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases.
    We have christened this proprietary development RI Carbon: Reinforced Carbon.
    However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing.

    For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light.

     Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material. Carbon might have different colour shades and nuances.

    * * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness.

    * Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options.
    Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.

     

  • Titan Ceramics Titan Ceramics is satin titanium Soft Touch Cermaics Coating.
    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates.
    Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F).
    This makes the coating ideal exhaust systems and components.
    Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.
    These coatings provide superior protection again corrosive environments and thermal shock.
  • Aluminum sheath coated with Black velvet Matt Ceramics. Matt Black Velvet, length 450-200mm, 2mm aluminum shell Our Ceramic coatings are temperature stable from 650°C, up to 1,100°C for the Black Velvet series. We process two high quality Ceramic formulations. The Ultra Performance Metallic Series. Temperature stable to over 650°C, Black Velvet offers very good corrosion protection, as well as optimum flexibility on all base materials. The Ultra Performance Satin Metallics are not comparable to conventional silicone products. Temperature stable up to over 1,100°C, our Ceramic Coatings are characterized by an optimal flex in combination with a hard and abrasion resistant surface. No calcification at constantly high operating temperatures, no cracking or detachment even at extreme temperature fluctuations. Properties Temperature stable up to over 1,100°C Excellent corrosion protection Optimum combination of flex and hardness Chemical resistant Very good thermal insulation / reduction of radiation temperature

     

Inlet cap V2A

Dual silencer need inlet cap item 2x

  • Einlasskappe V2A High-Polished
  • Einlasskappe V2A High-Polished
  • Einlasskappe in Black Velvet Matt Ceramics: Black Velvet ist eine hochwertige matt black Ceramik Beschichtung. Black Velvet setzt durch die spezielle SoftTouch Oberfläche neue Akzente in Sachen Design. Laserlogo nicht möglich mit Kombination black-schwarz. Die Ultra Performance Satin Metallics sind nicht vergleichbar mit herkömmlichen Silikon Produkten. Temperaturstabil bis über 1.100°C zeichnen sich unsere Ceramic Coatings durch einen optimalen Flex in Verbindung mit einen harten und abriebfesten Oberfläche aus. Kein Auskalken bei konstant hohen Betriebstemperaturen, keine Rissbildung oder Ablösung auch bei extremen Temperaturschwankungen.
Header

stainless steel

Header
  • Made out of stainless steel factory look
  • Matt Black Ceramic is a high-quality matt black coating. Matt Black sets new accents in terms of design due to the special surface. These Ceramic Coatings are not comparable with conventional silicone products. Temperature stable up to over 800°C, our Ceramic Coatings are characterized by an optimal flex in combination with a hard and abrasion resistant surface.
  • Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat.
Options

There is a wide range of silencer options. You can order a silencer in full black including caps and diffusor, as well as customise the Factory Racing Style end caps with tempered weldseams. You can also choose other options to configure a customised system, which will be manufactured according to your requests and specifications.

Options
  • Please tell us your bikes year and type.
  • Please tell us about the motorcycle year and type.
  • polished
    material stainless steel, 

    This item cannot be ordered individually, only as an upgrade option (surcharge).
  • Made of stainless steel.
  • Anmerkung: Nietenbänder und Schelle falls diese zum Lieferumfang gehören!
Logo

Decide to use between different choices of logos. Use Aluminum decal standard or Performance logo, 3D aluminum nameplate logo ( heat resistant, Standard Design) or Laser Logo ( not possible on Carbon or AL)

Logo
  • Barracuda Laserlogo exclusiv, edel, einzigartig!

    Wirkt sehr hochwertig auf mattschwarz, mattgebürstet und titanium finish.


    Anmerkungen:
    *Laserlogo geht nicht auf Carbon
    * Ist auf polierten Aluminium Hüllen nicht sehr stark ausgeprägt.

    * Bei dünnem Material wie 1mm oder düneres Edelstahblech- und Rohr und/oder Titanrohr kann es zu leichten Einwölbungen beim Lasern
    Das beieinträchtig nicht die Stabilität des Materials.



     

Catalytic converter

Your configuration
Barracuda MAX RX exhaust systems are the ultimate challenge for every sports biker and belong to the best sport exhaust systems with ABE* on the market. Quality and reliability, high availability and affordable price are exceptional features: just Made in Germany. Only a few exhaust systems producers world wide are in postion to provide these features. The net weight of the lightest Full Titanium silencer is under 1 kg!!! Complete systems 4in1 include the optimised high-performance manifolds with mid-pipe, silencer, mounting material and removable DB Killer*31. The round-shaped stainless-steel/aluminium silencer can be upgraded with different short lengths and sleeve materials, as well as containing a catalytic converter, for an extra charge. Other configurations are also available! Features: low weight, removable DB Killer*31, ultra-light hangers, corrosion-resistant construction, cylindrical, conical or round mid-pipes made of V2Aplus stainless-steel, high gloss polish finish, and securing by springs. Variations in length and torsion are also available (according to type) to obtain optimal ground clearance and low weight in accordance with the series specifications. 3 year warranty. And of course, the rich, deep sound and improved performance are all-inclusive! Please also check the declaration of weight of the particular silencer.

Make: KAWASAKI
Model: ER 6N-F / Ninja 650 Ninja 650 Z 650
Notes & Exceptions: *a1/*e1 *catalyst
Year: 2017 2016 2015 2014 2013 2012
Remarks: *32 *45

Average product review

Write your first review and help others with their purchase decision: