Barracuda GP1 Cone Series Ultrashort Underengine Kawasaki ZX-10R Ninja 2011- Slipon mit ABE

numero articolo: 933-4475-34UD

Kit Slipon con omologazione europea. Kit istallazione completo di tutti i componenti, sostegno, Db Killer rimovibile *31. A scelta sezione rotonda/ovale in Alluminio/CarbonRi/Titanio più upgrade in lunghezza shorty. Note:

categoria: ZX-10R Ninja 2011-


da 277,77 €

incl. 19% USt. , zzgl. spedizione

disponibile subito

data di consegna: #global.deliverytimeEstimationSimple#

Finanzieren ab 20 EUR / Monat
Mehr Informationen zum Ratenkauf


Lunghezza dello scarico
  • 2 Upgrades are necassary for SLO Dual.
  • Upgrade sleeve length to 300mm.

    Only MC-UC-Gp1 Cone-GP2 Cone , MGP Cone , SP1 Cone
    This item cannot be ordered individually, only as an upgrade option (surcharge).
  • Upgrade sleeve length to 200mm.

    Only MC-UC-Gp1 Cone-GP2 Cone , MGP Cone , SP1 Cone
    This item cannot be ordered individually, only as an upgrade option (surcharge).
Materiale dello scarico
  • tirado a lucido
    materiale acciaio inossidabile, 

    Questo elemento non può essere ordinato, ma solo come opzione di aggiornamento (a pagamento).

  • -superficie: titanium finish
  • opaco black/nero
    Hyperseries Special sleeve mattblack upgrade

    Questo elemento non può essere ordinato, ma solo come opzione di aggiornamento (a pagamento).
Endcap
midpipes
midpipes
  • Linkpipe Factory stainless steel factory look.
  • Linkpipe stainless steel matt brushed.
  • Stainless steel linkpipe matt black. Ultra Performance Coating based on silicon in matt black.
  • Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection
Logo

Decide to use between different choices of logos. Use Aluminum decal standard or Performance logo, 3D aluminum nameplate logo ( heat resistant, Standard Design) or Laser Logo ( not possible on Carbon or AL)

Logo
  • Barracuda 3-D Exhaust Nameplate . Hitzefestes 3-D Aluminium Logo/Nameplate mit Hitzedichtung und 2 Nieten. Wunderschönes Aluminium , geschliffenes, erhaben 3D Barracuda Nameplate.
  • Laserlogo Barracuda -exclusiv, edel, einzigartig! Wird an die gewünschte Spezifikation und Auspuffserie angepaßt! Nicht als eigenständiges Produkt beziehbar, sondern nur als upgrade zu einem Dämpfer oder einer Anlage!
    Anmerkungen: Ist nicht lieferbar für Carbon. Auf der polierten Aluminium Hülle nicht sehr stark ausgeprägt. Gut sichtbar auf allen anderen Materialien , wie Alu Matt.Titan, Black, Brushed, Factory Look.
    Anmerkung: Auf  Aluminium Hüllen ist das weisse Laserlogo nur dezent, nicht akzentuiert sichtbar.
    Je nach Material wird das Logo als Voll oder Outline Logo gelasert.
la loro configurazione

I terminali di scarico Slipon contengono il silenziatore con tubo centrale, materiale per l?istallazione e il DB Killer rimovibile. Il silenziatore in Acciao-Alluminio con sezione rotonda può essere aggiornato dietro pagamento di un sovraprezzo in diverse lunghezze shorty e materiali di rivestimento, come anche i catalizzatori. Varie configurazioni possono essere spedite. Caratteristiche: peso limitato, DB Killer rimovibile *31, sostegno leggerissimo, costruzione inossidabile, tubo centrale a forma cilindrica, conica o rotonda in Acciaio V2Aplus, lucidato, molla e secondo il modello diverso in lunghezza e piegatura per raggiungere una distanza dal suolo ottimale e peso limitato sotto valori di serie predefiniti, 3 anni di GARANZIA, Sound pieno e profondo. *** Prestare attenzione anche alle indicazioni di peso dei relativi silenziatori.

For the riders and track day enthusiasts who are also dedicated race fans, Barracuda has created the GP Series. This pipe mirrors the form and function of exhausts seen throughout the MotoGP paddock.
As mass centralization becomes the key philosophy in the design of race bikes, Barracuda meets the demands of a performance-based low-slung exhaust that offers both a serious performance boost and a sectionalized, hand welded GP look. This pipe features the first ever "dual curved baffle design". This gives it both a unique race sound as well as great performance characteristics. To finish it off it is media blasted to give it a "Titanium look" finish.

For the riders and track day enthusiasts who are also dedicated race fans, Barracuda has created the GP Series. This pipe mirrors the form and function of exhausts seen throughout the MotoGP paddock.

The Barracuda GP1 Cone Series Slip-on system is a parallel line to the Bolt-on series and is based on a simple replacement of the stock muffler together with the link pipe. The rest of the stock system remains untouched. The system is developed and fine-tuned for each specific model of motorcycle, and is the last step before a serious tune-up involving the replacement of the entire exhaust system.

The Slip-on system is designed for the individual who wants improved performance without the expense and labor involved of a full system. This system produces a much richer and deeper sound than the quiet restrictive stock exhaust. The Slip-on system will give your bike a completely new look. The muffler is available in aluminum, titanium or carbon-fiber outer sleeve and will accentuate the beauty of the lines of your bike. The logo on the muffler will be a constant affirmation of your discerning taste.

Barracuda GP1 Cone Series Slip-on System with DB Killer

A beautiful result with a simple procedure using tensioning springs.

Simple mounting, including set up and spring-loading between the Barracuda exhaust system components (muffler and link pipe) and the remaining parts of the stock exhaust system.

Removal of restrictions on the motor, leading to considerable increases in available power and torque.

Precision workmanship using high-tech materials.

Choice of different materials.

Characteristic deep penetrating Barracuda sound.

Aesthetic enhancement of the entire motorcycle.

Excellent compromise between price, quality and performance.

Reports on testing of Slip-on systems.

Allure of a world-class name in motorcycling.

For the riders and track day enthusiasts who are also dedicated race fans, Barracuda has created the GP Series. This pipe mirrors the form and function of exhausts seen throughout the MotoGP paddock. As mass centralization becomes the key philosophy in the design of race bikes, Barracuda meets the demands of a performance-based low-slung exhaust that offers both a serious performance boost and a sectionalized, hand welded GP look. This pipe features the first ever "dual curved baffle design". This gives it both a unique race sound as well as great performance characteristics. To finish it off it is media blasted to give it a "Titanium look" finish. The GP Series offers: ? CAD/CAM design for precise fit ? "Titanium look" media blast finish on a Stainless Steel muffler ? Muffler individually hand welded ? Significant weight savings over stock ? Slip-ons boost horsepower across RPM range (linear power) ? AISI 304 Stainless Steel internal construction ? Sectionalized GP look ? ? Produces a unique GP tuned sound ? Removable DB Killer sound insert for more aggressive tone ? Machine-specific tuning to work with stock fuel settings

fabbricante: KAWASAKI
anno di costruzione: 2015 2014 2013 2012 2011
Moto modello: ZX-10R Ninja

Media delle valutazioni dell'articolo

#global.firstReview#: