Barracuda GP-EVO F450 Series 4in2in1 Kit con omologazione europea

numero articolo: 914-1406-048HL

Kit 4in2in1 con omologazione europea. Kit istallazione completo di tutti i componenti, sostegno, Db Killer rimovibile *31. A scelta sezione rotonda/ovale in Alluminio/CarbonRi/Titanio più upgrade in lunghezza shorty. 450-350mm with EEC homologation Note: Particolarità:

categoria: CBR 650 F 2014 - 2018


da 699,95 €

incl. 19% USt. , zzgl. spedizione

disponibile subito

data di consegna: #global.deliverytimeEstimationSimple#

Finanzieren ab 22.5 EUR / Monat
Mehr Informationen zum Ratenkauf


Forma
Forma
Lunghezza scarico 450-350mm
Lunghezza scarico 450-350mm
Materiale dello scarico
Materiale dello scarico
  • -aluminum sleeve
    -materiale: 7075 T6
    -lunghezza: 450 -200mm
    -spessore: 2mm
    -superficie: opaco spazzolato
  • aluminium sleeve/materiale dello scarico, High Polished/muy pulido, lunghezza 450-200mm, 2mm
  • Black Velvet is a high-quality semi-matt black ceramic coating. Black Velvet is setting new trends in design and aesthetics with a specific SoftTouch surface area. The Ultra Performance Satin Metallics are not comparable to conventional silicon products. Our ceramic coatings, heatresisting up to approx. 1100 °C, offer an optimal flex together with a hard and abrasion-resistant surface. There is no scaling at constant high operating temperatures and there is no crack formation or detach under extreme temperature fluctuation. Laser logo is not available with combination black-black.
silenziatore di ingresso cap

Dual silencer need inlet cap item 2x

  • Einlasskappe V2A Stainless Steel high polished
  • V2A Stainless Steel matt gebürstet
  • Einlasskappe V2A Matt-Black
  • Black Velvet is a high-quality semi-matt black ceramic coating. Black Velvet is setting new trends in design and aesthetics with a specific SoftTouch surface area. The Ultra Performance Satin Metallics are not comparable to conventional silicon products. Our ceramic coatings, heatresisting up to approx. 1100 °C, offer an optimal flex together with a hard and abrasion-resistant surface. There is no scaling at constant high operating temperatures and there is no crack formation or detach under extreme temperature fluctuation.
midpipes
midpipes
  • Linkpipe Factory stainless steel factory look.
  • Linkpipe stainless steel matt brushed.
  • Stainless steel linkpipe matt black. Ultra Performance Coating based on silicon in matt black.
  • Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection
Outletcap
  • Unsere Ceramic-Beschichtungen sind Temperaturstabil von 650°C, bis hin zu 1.100°C bei der Black Velvet Serie. Wir verarbeiten zwei hochwertige Ceramic Formulierungen. Die Ultra Performance Metallic Serie. Die Hochtemperatur Serie steht für eine hochglanzpolierte, chromähnliche Oberfläche. Temperaturstabil bis über 650°C bietet Chromex einen sehr guten Korrosionsschutz, sowie eine optimale Flexibilität auf allen Grundmaterialien. Die Ultra Performance Satin Metallics sind nicht vergleichbar mit herkömmlichen Silikon Produkten. Temperaturstabil bis über 1.100°C zeichnen sich unsere Ceramic Coatings durch einen optimalen Flex in Verbindung mit einer harten und abriebfesten Oberfläche aus. Kein Auskalken bei konstant hohen Betriebstemperaturen, keine Rissbildung oder Ablösung auch bei extremen Temperaturschwankungen. Eigenschaften Temperaturstabil bis über 1.100°C Excellenter Korrosionsschutz Optimale Kombination aus Flex und Härte Chemikalienbeständig Sehr gute thermische Isolierung / Verringerung der Abstrahltemperatur Lieferzeit: ca. 4 Wochen
Reinforced Band
Reinforced Band
Clamp
Clamp
Collettori
Collettori
  • Made out of stainless steel factory look.
  • Lieferzeit 10 -12 Tage
  • Lieferzeit 10 - 12 Tage
  • Lieferzeit 10-14 Tage
  • Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection
Logo

Decide to use between different choices of logos. Use Aluminum decal standard or Performance logo, 3D aluminum nameplate logo ( heat resistant, Standard Design) or Laser Logo ( not possible on Carbon or AL)

Logo
  • Barracuda 3-D Exhaust Nameplate . Hitzefestes 3-D Aluminium Logo/Nameplate mit Hitzedichtung und 2 Nieten. Wunderschönes Aluminium , geschliffenes, erhaben 3D Barracuda Nameplate.
  • Laserlogo Barracuda -exclusiv, edel, einzigartig! Wird an die gewünschte Spezifikation und Auspuffserie angepaßt! Nicht als eigenständiges Produkt beziehbar, sondern nur als upgrade zu einem Dämpfer oder einer Anlage!
    Anmerkungen: Ist nicht lieferbar für Carbon. Auf der polierten Aluminium Hülle nicht sehr stark ausgeprägt. Gut sichtbar auf allen anderen Materialien , wie Alu Matt.Titan, Black, Brushed, Factory Look.
    Anmerkung: Auf  Aluminium Hüllen ist das weisse Laserlogo nur dezent, nicht akzentuiert sichtbar.
    Je nach Material wird das Logo als Voll oder Outline Logo gelasert.
Catalizzatore

For 2 muffler 2 catalyst!

Catalizzatore
  • Preis per Stk. pro Dämpfer Anmerkungen* Kat 200 CPSI *e1
  • Preis per Stk. pro Dämpfer. Anmerkungen* Kat 3/400 CPSI oder 2x 200 CPSI, je nach Modell *e1
la loro configurazione
I terminali di scarico Slipon contengono il silenziatore con tubo centrale, materiale per l?istallazione e il DB Killer rimovibile. Il silenziatore in Acciao-Alluminio con sezione rotonda può essere aggiornato dietro pagamento di un sovraprezzo in diverse lunghezze shorty e materiali di rivestimento, come anche i catalizzatori. Varie configurazioni possono essere spedite. Caratteristiche: peso limitato, DB Killer rimovibile *31, sostegno leggerissimo, costruzione inossidabile, tubo centrale a forma cilindrica, conica o rotonda in Acciaio V2Aplus, lucidato, molla e secondo il modello diverso in lunghezza e piegatura per raggiungere una distanza dal suolo ottimale e peso limitato sotto valori di serie predefiniti, 3 anni di GARANZIA, Sound pieno e profondo. *** Prestare attenzione anche alle indicazioni di peso dei relativi silenziatori.

fabbricante: HONDA
Moto modello: CB 650 F CB 650 R CBR 650 F
Note & Particolarità: Euro4 ECE-C BSI *a1/*e1 Euro3 Modelle
anno di costruzione: 2017 2016 2015 2014 2019
serie scappamento: Fullsystem 4 in 1
Lineamenti: *Komplettanlage 4in1, benötigt Kat Euro3
Note: *45

Media delle valutazioni dell'articolo

#global.firstReview#: